Absolute Digimatic Caliper 500 Series - with exclusive Absolute Encoder Technology

  • Availability:In Stock
  • Brand: Mitutoyo
  • Product Code: -

Product Features:

  • Electromagnetic induction system allows use in workshop conditions exposed to coolant, water, dust oil.
  • New ergonomic design with finger rest.
  • The ZERO/ABS button allows the display to be Zero-Set at any slider position along the scale for comparison measurements. This button will also allow return to the absolute (ABS) mode and display of the true position from the origin (usually jaws closed point).
  • Large and clear LCD readout.
  • Smooth slider movement makes for comfortable operation.
  • 18,000 hours battery life.
  • Allows step measurement.
  • Carbide-tipped jaw calipers are optimal for rough finished parts, castings, grinding stones, etc.
  • Allows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page A-3.

A built-in ABS (absolute) scale means that these calipers are ready to use immediately after power-on without origin resetting – just like using a vernier caliper.

Technical Data

Accuracy  ±0.02mm (≤200mm), ±0.03mm (≤300mm)
(excluding quantizing error)
Resolution 0.01mm or .0005"/0.01mm
Repeatability 0.01mm
Display LCD
Scale type* ABSOLUTE electromagnetic induction linear
Max. response speed Unlimited
Battery  SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life Approx. 3.5 years under normal use (18,000
hours for continuous use)



Absolute measurement After power is turned ON, measurement can be started without zero-setting if origin-setting was previously performed. The Absolute origin position can be changed by the ORIGIN button.
Incremental measurement Display can be set to zero at any arbitrary position for comparative measurements
Low-voltage alert If the battery voltage becomes low, a “B” appears in the display to alert the user before measurement is no longer possible. A battery change advisory alert precedes this alert.
Data output By using the connecting cable (option),measurement data can be output.
Data hold By using the data hold unit (option), the displayed value can be held. This cannot be used with the data output function.