DESCO #50644 - Charge Buster Ion Gun, 220VAC

• Point-of-use compressed gas ionizer 
  Neutralize electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris
• Fast < 1 second discharge time with ± 30 volt offset voltage balance
  For use with multiple requirements where static charges 
  may generate
• Modular design with 7 foot ESD protective hose with trigger switch
  Allows operators freedom of motion and minimizes awkward or unsupported positions
• Use filtered air or nitrogen – no adjustment required
  Allows for quick change between air supply
• Console mounting hardware included 
  Allows Chargebuster Ion Gun to be mounted in a convenient location
• Quick filter replacement feature
  Minimizes down time
• One year limited warranty

*220V power supply with IEC connector included. Power cord must be purchased separately. 
Use Item 50545 for Europe or Item 50546 for UK/Asia 

The Chargebuster Ion is a point-of-use ionizer using compressed air or nitrogen to neutralize electrostatic charges from a small, defined area and/or to facilitate removal of charged particles. These ready-to-use units are designed for use in applications and areas where ElectroStatic Attraction contamination create manufacturing or handling problems (Ref: ESD Handbook TR 20.20 paragraph 5.3.6.5.2.4 Point of Use Ionization). The Chargebuster Ion meets or exceeds the recommended technical requirements of ANSI/ESD S20.20 tested in accordance with ANSI/ESD S3.1.
 

“Necessary non-conductors in the environment cannot lose their electrostatic charge by attachment to ground. Ionization systems provide neutralization of charges on these necessary non-conductive items (circuit board materials and some device packages are examples of necessary non-conductors). Assessment of the ESD hazard created by electrostatic charges on the necessary nonconductors in the work place is required to ensure that appropriate actions are implemented, commensurate with risk to ESDS [ESD sensitive] items”. [ANSI/ESDS20.20-2007 Foreword]”

"Activities that handle items that are susceptible to less than 100 volts HBM may require additional control elements or adjusted limits.” [ANSI/ESD S20.20 section 2.0]