The VMS400 is a mini-spool type pneumatic valve designed for dispensing low viscosity to high viscosity materials.
3-Way & 4-Way Valve Operation
When air pressure is applied to the air inlet of the VMS400 valve, the spool will be forced forward and fluid will be dispensed. The VMS400 valve has a suck-back effect that eliminates lumping at the end of the needle after dispensing. Turning the adjustment control at the top of the valve regulates the amount of suck-back.
Shot size and flow rate are controlled by the tip size, fluid pressure and the duration that the valve is open.
The model DSP501N is a suitable controller for the VMS400 valve. For faster actuation, the 4-way VC1195N valve controller is recommended.
Features
- High-pressure fluid input up to 700 psi
- Suitable for high viscosity fluids
- Adjustable "suck-back" fluids
Model
| VMS400 | Mini spool vlave |
VMS00 Specifications:
| Operating air pressure | 60-85psi (4.1-5.9 bar) |
| Material delivery pressure | 711psi (49 bar) |
| Flow rate | Max 5.0 l/min |
| Minimum shot size | 0.1cc |
| Driving part materials | |
| Body, Piston | SUS303 |
| Spool | SUS420 |
| CAP | AL (hard coated) |
| Wetted part materials | |
| Chamber, Chamber Cap | SUS303 |
| Seal | UHMW-PE lip seal |
| Connecting Ports | |
| Operating air inlet | M5xP0.8 |
| Exhausting outlet | M5xP0.8 |
| Material inlet, outlet | 1/8" NPT |
| Weight | 255g |
