The HP600S and HP600L high-pressure dispense valves are a robust long-life solution for dispensing high viscosity materials such as silicone, RTV, sealant and grease. Both valves are adjustable for shot size.
4-Way Valve Operation
The HP600S & HP600L are balanced type "on/off" segmented high-pressure needle valves, which require a model VC1195N 4-way valve controller. Applying a minimum of 56 psi to the air inlet will retract the needle allowing material to flow. Switching the air signal on the controller will return the needle to its seated position closing the valve.
Features
-
High-pressure fluid input
- Adjustable for shot size
- 4-way operation - quick shut off
- Suitable for very high viscosity fluids
- Replaceable seals
Model
| HP600S | High-pressure valve small shot |
| HP600L | High-pressure valve large shot |
HP600 Specifications:
| Operating air pressure | Max. 60-71psi (4.1 - 4.9 bar) |
| Fluid delivery pressure | HP600S: 2,133psi (147 bar) HP600L: 1,565psi (107.9 bar) |
| Minimum shot size | HP600S: 0.01cc HP600L: 0.2cc |
| Valve type | Needle |
| Driving part materials | |
| Cylinder body, CAP | AL (hard anodized) |
|
Piston, Check body |
STS303 |
| Wetted part materials | |
| Chamber | SUS303 |
| CAP,CV body | AL (hard coated) |
| Seals | Acetal Teflon |
| Connecting ports | |
| Operating air input | M5xP0.8 , 4mm fitting ø6 OD Air hose |
| Material inlet | 1/4" NPT |
| Material outlet | 1/4" NPT Luer lock (male) |
| Weight | 950g |
