The VC1195N is a 4-way valve controller that can be used to control one or two valves simultaneously. The controller is suitable for all valves in the brochure identified as requiring or optionally accepting a 4-way controller.
The VC1195N valve controller provides a continuous “valve-off” state and remains in this mode until a signal is received to switch to “valve-on” mode. This instruction can derive from a remote robotic device or by the foot switch provided. When the timer is off, the valve will remain in “valve-on” state as long as the foot switch is pressed or to allow a robot to control the operation. When the timer is selected, a momentary pulse will activate the timer to open the valve for a programmed period and then close the valve automatically.
The VC1195N will deliver accurate and repeatable dots or beads for any application.
Features
- Simultaneous control of two valves
- Timing interval of 0.01 - 31 seconds
- Fast response internal pneumatic solenoid
Model
| VC-1195N | 4-Way valve controller 110/220V CE |
Parts (included)
| 560033-LF | Power cord 110V |
| 560033E-LF | Power cord 220V |
| 560033E-PLUG-LF | Power cord with plug 220V |
| 560752 | Input air hose with accessories |
| 560027D | Foot pedal and cord |
| 560524 | 6 ft. air hoses x2 |
VC1195N Specifications:
| Size | 10.50" x 8.25" x 2.75" (26.67 x 20.95 x 6.98cm) |
| Dispense time | 0.01 – 30 seconds |
| Cycle initiation | Momentary or continuous |
| Voltage | 100 - 240 VAC 50/60Hz |
| Internal voltage | 24 vdc |
| Air input | 70 - 100psi (4.8-6.9 bar) |
| Air output | 1 - 100psi (0.1-6.9 bar) |
| Weight | 4lbs. 3oz. (1.90kg) |
