The VP300 is a multipurpose, poppet-type pneumatic valve designed for dispensing low to mid-high viscosity materials, such as silicone, RTV, epoxy, rubber adhesive, grease, liquids containing filler, etc.
A diaphragm located between driving parts and wetted parts increases the valve life and reduces valve maintenance.
3-Way & 4-Way Valve Operation
When air pressure is applied to the valve, the valve seat will open and the material will be dispensed. Shot sizes may be fine tuned by turning the control knob at the top of the valve.
The VP300 valve has a suck-back effect that eliminates lumping at the end of the needle after dispensing. The suck-back effect occurs when the valve is closed because of the change in the volume of the material area as the poppet moves up in the valve.
The model DSP501N is a suitable controller for the VP300 valve. For faster actuation, the 4-way VC1195N valve controller is recommended.
Features
- Stroke adjustment to fine tune shot size
- "Suck-back" effect
- Seperated wetted parts
- Suitable for filled materials
Model
| VP300 | Poppet valve |
VP300 Specifications:
| Operating air pressure | 60-85psi (4.1 - 5.9 bar) |
| Fluid delivery pressure | 85psi (5.9 bar) |
| Flow rate | Max. 2.4 l/min |
| Minimum shot size | 0.05cc |
| Driving part materials | |
| Body | AL (hard anodizing, black) |
| Piston | SUS303 |
| Piston Seal | NBR |
| Wetted Part Materials | |
| Cahmber, CAP | AL (hard anodizing, black) |
| Diaphragm, valve seat | UHMW-PE |
| O-ring (CAP): | Viton |
| **Option** | The Chamber, CAP, and wetted parts can be replaced with SUS303, AL, PPEK, Acteal. |
|
Connecting ports |
|
| Operating air input | M5xP0.8 |
| Material inle | 1/8" NPT |
| Material outlet | 1/4" NPT / Luer lock |
| Mounting hole | M5xP0.8 |
| Weight | 258g |
