SV1000SS Adjustable Stainless Steel Spray Valve
- RM0
- Availability:In Stock
- Brand: Fisnar
- Product Code: SV1000SS
The SV1000SS spray valve provides close tolerance spray dispensing of fluids of up to 1000 cps. The SV1000SS is constructed of stainless steel to prevent corrosion from volatile materials. With a spray angle of 12 degrees and an operating frequency of 200 cycles/min, the SV1000SS is designed for spraying flux, urethane, paint, lubricants, and for coating and conformal coating and marking applications.
Operation
The valve is adjustable by turning the stroke-adjust control at the rear of the valve; this will tune the spray pattern.
Coating and flow rate are controlled by the fluid pressure, needle stroke, distance from the valve to the work and the duration the valve is open.
Features
- Shot rate frequency of 200 cycles/min
- Suitable for spraying paint, flux, urethane, and lubricants
- Stainless Steel fluid body
- Stroke adjustment to fine-tune spray area
- Nozzle design prevents clogging
- Designed for materials under 1000cps
Models
| SV1000SS | Spray valve fine dot & bead |
SV1000SS Specifications:
| Operating air pressure | 70-100 psi (4.8 - 6.9 bar) |
| Atomizing air pressure | 1-30 psi (0.1-2.1 bar) |
| Fluid viscosity range | up to 1000 cps |
| Fluid pressure | 1-100 psi (0.1-7 bar) material dependent |
| Operating frequency | Over 200 cycles/min |
| Flow rate | Up to 28 cc/min |
| Spray pattern | Circular (conical spray) |
| Spray angle | 12° |
| Nozzle diameter | 0.028" (0.71 mm) |
| Operating air inlet | 10-32 thread with push-in fitting for 1/4" tube |
| Atomizing air inlet | 10-32 thread with push-in fitting for 1/4" tube |
| Material inlet | 1/8" NPT with compression fitting for 1/4" tube |
| Weight | 10.25 oz. (290gm) |
