VMP30H - Mini Poppet Valv

  • Availability:In Stock
  • Brand: Fisnar
  • Product Code: VMP30H

The VMP30H is a multipurpose, mini-poppet pneumatic valve designed for dispensing low to mid-high viscosity materials, such as silicone, RTV, epoxy, rubber adhesive, grease and filled materials.  The poppet design minimizes surface area and friction between the valve piston and the material, making it ideal for filled materials and extending the life of the valve seals.

A diaphragm located between driving parts and wetted parts increases the valve life and reduces valve maintenance.

3-Way & 4-Way Valve Operation

When air pressure is applied to the valve, the valve seat will open and the material will be dispensed.  Shot sizes may be fine tuned by turning the control knob at the top of the valve.  

The VMP30H valve has a suck-back effect, which draws material back into the fluid body at the end of the dispensing cycle.  This eliminates lumping at the end of the needle after dispensing.

The model DSP501N is a suitable controller for the VMP30H valve. For faster actuation, the 4-way VC1195N valve controller is recommended.

Features

  • Stroke adjustment to fine tune shot size 
  • "Suck-back" effect
  • Seperated wetted parts
  • Suitable for filled materials

Model

VMP30H Mini Poppet valve

MV-0180LF Specifications:

Operating air pressure 50-85psi (3.4 - 5.9 bar)
Fluid delivery pressure Max. 85psi (5.9 bar)
Flow rate Max. 1.2 l/min
Minimum shot size 0.01cc
Driving part materials  
Body AL (hard anodizing, black) 
Piston SUS303
Piston Seal NBR
Wetted Part Materials  
Cahmber, CAP SUS303
Diaphragm, valve seat UHMW-PE
O-ring (CAP) Viton
**Option** The Chamber, CAP, and wetted parts can be 
replaced with SUS303, AL, PPEK, Acteal.

Connecting ports

 
Operating air input M5xP0.8
Material inlet 1/8" NPT
Material outlet Luer lock
Weight 162g