VP300 - Poppet Valve

  • RM0
  • Availability:In Stock
  • Brand: Fisnar
  • Product Code: VP300

The VP300 is a multipurpose, poppet-type pneumatic valve designed for dispensing low to mid-high viscosity materials, such as silicone, RTV, epoxy, rubber adhesive, grease, liquids containing filler, etc.

A diaphragm located between driving parts and wetted parts increases the valve life and reduces valve maintenance.

3-Way & 4-Way Valve Operation

When air pressure is applied to the valve, the valve seat will open and the material will be dispensed.  Shot sizes may be fine tuned by turning the control knob at the top of the valve.

The VP300 valve has a suck-back effect that eliminates lumping at the end of the needle after dispensing.  The suck-back effect occurs when the valve is closed because of the change in the volume of the material area as the poppet moves up in the valve.

The model DSP501N is a suitable controller for the VP300 valve. For faster actuation, the 4-way VC1195N valve controller is recommended.

Features

  • Stroke adjustment to fine tune shot size 
  • "Suck-back" effect
  • Seperated wetted parts
  • Suitable for filled materials

Model

VP300 Poppet valve

 

VP300 Specifications:

Operating air pressure 60-85psi (4.1 - 5.9 bar)
Fluid delivery pressure 85psi (5.9 bar)
Flow rate Max. 2.4 l/min
Minimum shot size 0.05cc
Driving part materials  
Body AL (hard anodizing, black) 
Piston SUS303
Piston Seal NBR
Wetted Part Materials  
Cahmber, CAP AL (hard anodizing, black)
Diaphragm, valve seat UHMW-PE
O-ring (CAP): Viton
**Option** The Chamber, CAP, and wetted parts can be replaced 
with SUS303, AL, PPEK, Acteal.

Connecting ports

 
Operating air input M5xP0.8
Material inle 1/8" NPT
Material outlet 1/4" NPT / Luer lock
Mounting hole M5xP0.8
Weight 258g