DESCO #19278 - Combo Tester X3, With Dual Plate
- RM0
- Availability:In Stock
- Brand: Desco
- Product Code: #19278
Product Features:
SmartLog V5™
- NEW Compatibility with ESD Glove Test Fixture
- Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
- Tests Operator’s Path-To-Ground; Wrist Strap limits 750 kilohms to 10 megohms, Footwear limits 750 kilohms to 35 megohms*
- Determines that operator’s personal grounding device** is functioning correctly
- Simultaneous Testing in Up to 3 Seconds
- Reduces time spent testing personal grounding devices used in ESD Control Plans
- Solid State Touch Test Button with No Moving Parts
- Maintains accuracy of tests and extends the lifetime of the tester
- Split Foot Plate for Testing Foot Grounders (or Shoes)
- Tests both foot grounders independently at the same time
- 30 Volt Test Signal
- Provides accurate tests that are not humidity dependent
- Relay for Use with Automatic Doors Or Other Locking Systems
- Controls access to ESD Protected Areas
- Stainless Steel Foot Plates
- Easy to clean and maintain
- Optional Stand
- Use the Desco 19255 stand as an alternate installation method for the Combo Tester X3
- Calibration Unit Available for Accurate Performance And Conformity Testing In The Field
See Desco Item 50424
- NIST Calibrated
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on calibration of Desco products, see Calibration
- 100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe - Made in the United States of America
- This item is made and stocked in Chino, CA
* Default test ranges listed. Additional test settings are noted in the tech bulletin TB-3034.
- ** The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.