Cleanroom ESD Shoes 4-Holes #PSS9289 (Dark Blue)

Footwear coverings for human foot that have properties to dissipate static charge when used in conjunction with static control floor or floor surface.

* Application:

Electrostatic Control at Indoors For Any Clean Environmental Working Area.

* Specification:

·        Product Type : Direct injection molding

·        Material Outer Sole - PVC (Polyvinyl Chloride) + Conductive Compound (White Sole)

·        Inner Sole - Polyester with Bio-Dots + Latex Sponge + T/C Fabric

·        Upper Cover

·        Outer Layer - PVC (Polyvinyl Chloride)  

·        Middle Layer – PVC (Polyurethane) Foam

·        Inside Layer – T/C Fabric (65/35 – Polyester / Cotton)

·        Sewing Thread Made of Filament Yarn

·        Weight : 550 – 600 Grams/Pair (+/- 50 Gram Per Size)

·        Surface Resistivity :10⁸ Ω/m²

·        Resistivity to Ground : 10⁶ – 10⁷ Ω

·        Static Decay Time : <0.1 sec (5 KV – 0 V)

* Size Specification for #PSS1288 / #PSS1289 / #PSS9289:

Size 13 (300mm) is only available for #PSS1288 only.

*Recommendable Washing Condition:

•        Recommendable washing temperature is 40^oC.
•        Recommendable drying temperature is 40^oC.
•        Pre-laundry is required for cleanroom use before initial use.
•        Do not dry in tumbler drum dryer or heat chamber.
•        Hanging dry is more recommended.
•        Neutral detergent (Rh 7) is recommended.
•        Do not use solvent based chemical.
•        Do not bleach.
•        Do not squeeze by hands for drying.
•        Do not keep at exposure of direct sunlight for long hours.

Comparison between Hottemp Shoes & China-brand Shoes:-